Copy Room Equipment

How to use the laminator

The laminator can be found in the copy room in the bottom-rightmost drawer, and the laminator carrier and laminating sleeve can be found in the same drawer to the left of the laminator.

Warning: If you plan to laminate a sheet of paper which you will cut into pieces (such as with the QR code signs), it is best that you cut the paper before laminating, then laminate, then cut the laminated pieces.

Laminating:

  1. Plug in the laminator.
  2. Set the laminator's switch to "Heat Only" by pressing it to the rightmost option.
    IMG_20220823_113040.jpg
  3. Wait 3 minutes.
  4. While waiting, open the laminating sleeve and place your paper centered in the sheet. (Open side top in first image.)
    IMG_20220823_113143.jpg